Fixed PWG-II pulse generator

PWG II – Pulse generator

Effective cable search on plastic cables and other non-metallic pipes

The PWG II (Pulse Wave Generator) is designed for fast and accurate location of water pipes in conditions where traditional pipe locators cannot be used. The system enables the detection of plastic pipes, PE pipes and other non-metallic pipes without tracer wire or embedded metal parts.

Using acoustic pulses sent through the water pipe, the pipe's route can be traced directly from the ground with a geophone or ground microphone. The system is particularly suitable for documenting unknown pipe routes, checking existing GIS data and locating pipes before excavation.

How PWG II works

The PWG II is mounted directly to a hydrant, valve or internal installation via a quick-connect fitting. When activated, the system generates a series of acoustic pulses that propagate through the water and further along the pipe.

The pulses are recorded on the ground surface using a geophone or FAST Aqua M-series listening equipment. By following the strength of the signal, the operator can quickly and accurately map the route of the line.

Developed for difficult wiring routes

PWG II is particularly effective at:

  • PE wires

  • PVC wires

  • Non-metallic water pipes

  • Unknown wiring routes

  • Incomplete or outdated GIS data

  • Power cords and supply lines

The system can be used without interruption of the supply and only requires an operating pressure of approximately 2 bar to function.

Up to 600 meters range

Under good conditions, the PWG II can trace cable runs of up to 600 meters from a single connection point, making the system particularly useful for mapping long plastic cables where traditional electromagnetic search methods are not possible.

Areas of application

PWG II is used, among other things, for:

  • Locating plastic cables

  • Mapping of unknown pipeline routes

  • Checking and updating GIS data

  • Cable search before excavation work

  • Verification of existing wiring diagrams

  • Location of branch pipes

  • Cable tracing in residential areas

  • Wire search in supply networks

Comes with

  • PWG II pulse generator

  • Transport case

  • Short and long stamp

  • GK/GEKA couplings

  • Charger

  • Connection equipment

Do you have questions about PWG II?

Danish Water Innovation helps with advice, demonstration, delivery and training in the use of PWG II.

Contact us at +45 31 72 31 31 or via the contact form for further information.

Do you have questions about Fast PWG-II pulse generator?

You are always welcome to contact us by phone +45 31 72 31 31, or via the form if you have questions about the product.

See more about Fast PWG-II pulse generator on Fast's website:   Fixed PWG-II pulse generator

  • Effective wire search on plastic and PE wires
  • Ideal when tracer wire is not available
  • Up to 600 meters of traceable cable length
  • Only requires approximately 2 bar operating pressure
  • No interruption of water supply necessary
  • Quick check of unknown wiring routes
  • Perfect for updating and verifying GIS data
  • Mounted directly on hydrant or installation
  • Can be used with FAST Aqua M series and ground microphones
  • Simple and robust solution for professional wire tracing

Contact DWI

Contact us for competent advice, leak detection and pipe location for your waterworks or water supply. We also assist commercial customers and private households with professional solutions.

 

Telephone

+45 31 72 31 31

 

Email

info@dwi.dk

Danish Water Innovation is a spin-out of Leif Koch which has closed down. You get the same professional expertise and quality you know — now with even more specialists behind you.